ViewSonic VX1933W Service Manual page 69

ViewSonic Corporation
display mode.
2. Show on existing Display Mode setting by red
color
3. Key button definition:
[1]: Back to previous OSD status
[2]: Change to the selected Display Mode
setting.
[Up]: Scroll up the slider
(When push the button on the top
position, the slider shall go down to the
bottom item)
[Dn]: Scroll down the slider
(When push the button on the bottom
position, the slider shall go up to the top
item)
4. Save PC timing and DTV timing setting
separately.
5. Default = RGB Mode(VGA&DVI)
HDMI is auto detected by Info Frame :
YPbPr -> YUV mode,
Non-YPbPr -> RGB mode.
7. It will recall to default after AC/DC on/off or mode
.
change
66
YUV Mode
Set color space to YUV for HD timing
mode
CONFIDENTIAL – DO NOT COPY
VX2433wm-1
VX2433wm-CN