ViewSonic VX1933W Service Manual page 61

Input Select
1. Show on existing input port by red
color
2. Key button definition:
[1]: Back to previous OSD status
[2]: Change to the selected input port
ViewSonic Corporation
3. Key button definition:
[1] = Back to Main Menu or OSD off
(depend on previous status)
[2] = Change to Brightness OSD
[Up] = Increase the OSD value setting
[Dn] = Decrease the OSD value
[Up]+[Dn]: Recall to default
Brightness
1. Adjust range = 0 to 100
2. Default = 100
3. Key button definition:
[1] = Back to Main Menu or OSD off
(depend on previous status)
[2]: Change to Contrast OSD
[Up]: Increase the OSD value setting
[Dn]: Decrease the OSD value
[Up]+[Dn]: Recall to default
D-SUB
Step 1: Turn off OSD.
Step 2:
1. Target video input port = Analog
2. If signal detected from target port, change to
target port.
3. If no signal detected from target port, keep
existing input port.
Step 3: Show on Input Message OSD at the
right-top corner of screen for 1 second.
58 CONFIDENTIAL – DO NOT COPY
VX2433wm-1
VX2433wm-CN