ViewSonic VX1933W Service Manual page 54

[ ]+ [ ]
[1] + [2]
[1] + [ ] + [ ]
(Keep pushing 5 sec)
ViewSonic Corporation
When switch to HDMI
When switch to AUDIO IN (earphone jack)
1. In the CR/ BT menu, Recall Contrast or Brightness to
default in its menu without OSD message.
2. In the Audio menu, Recall both of audio volume and
mute to default without OSD message.
* While OSD menu off, recall CR/ BT/ Audio volume and
mute to default without OSD message.
Toggle 720x400 and 640x400 mode when input 720x400 or
640x400 mode
* Default = 720 x 400
White Balance
1. It will not shown on user's guide
2. OSD message as below,
3. Recommend environment
3.1. Optical (Best) input timing = 640 x 480 @ 60Hz;
Following timing modes also recommended,
800 x 600 @ 60 Hz
1024 X 768 @ 60 Hz
3.2. Pattern as below,
51 CONFIDENTIAL – DO NOT COPY
(Image = no blanking)
VX2433wm-1
VX2433wm-CN