ViewSonic VX1933W Service Manual page 62

[Up]: Move up the slider
[Dn]: Move down the slider
ViewSonic Corporation
DVI
Step 1: Turn off OSD.
Step 2:
1. Target video input port = Digital
2. If signal detected from target port, change to
target port.
3. If no signal detected from target port, keep
existing input port.
Step 3: Show on Input Message OSD at the
right-top corner of screen for 1 second.
HDMI PC
Step 1: Turn off OSD.
Step 2:
1. Target video input port = HDMI PC
2. If signal detected from target port, change to
target port.
3. If no signal detected from target port, keep
existing input port.
Step 3: Show on Input Message OSD at the
right-top corner of screen for 1 second.
HDMI
HDMI AV
Step 1: Turn off OSD.
Step 2:
1. Target video input port = HDMI AV
2. If signal detected from target port, change to
target port.
3. If no signal detected from target port, keep
existing input port.
4. When HDMI input and color space is YUV, it
will first detect HDMI AV
Step 3: Show on Input Message OSD at the
59
PC
CONFIDENTIAL – DO NOT COPY
VX2433wm-1
VX2433wm-CN