ViewSonic VX1933W Service Manual page 74

Memory Recall
1. Background = blanking
2. Recall white balance to factory
setting
3. Recall all the OSD setting to the
default. (include the R/G/B in User
Color)
4. Show the message OSD position is
ViewSonic Corporation
Sleep
6. Adjust time range before going to sleep
mode. Time range = 30, 45, 60, 120
(Minutes) and Off.
7. Default = Off
8. When Sleep mode is triggered, the power of
monitor will be turned off.
9. Only active in HDMI Mode (both in AV&PC)
10. when selected item of Sleep make monitor
AC/DC OFF/ON,it will reset to off
11. Key button definition:
[1]: Back to previous OSD status
[2]: Change to the selected sleep time setting
[Up]: Rolling up the slider
(When push the button on the top
position, the slider shall go down to the
bottom item
[Dn]: Rolling down the slider
(When push the button on the bottom
position, the slider shall go down to the
top item
71
30 Minutes
Set time before going to Sleep mode
= 30 Minutes
45 Minutes
Set time before going to Sleep mode
= 45 Minutes
60 Minutes
Set time before going to Sleep mode
= 60 Minutes
120 Minutes
Set time before going to Sleep mode
= 120 Minutes
Off
Disable Sleep mode.
CONFIDENTIAL – DO NOT COPY
VX2433wm-1
VX2433wm-CN