ViewSonic VX1933W Service Manual page 67

ViewSonic Corporation
1. Adjust range ={0,25,50,75,100}
2. Default = 50
3. Key button definition:
[1]: Back to Manual Image Adjust OSD
[Up]: Increase the OSD value setting
[Dn]: Decrease the OSD value
Dynamic Contrast
Swap on and off the Dynamic Contrast function
Default = Off
When Dynamic Contrast is on, below functions
will be disabled:
5. Brightness/Contrast menu
6. SRGB selection in Color Adjust
7. White balance hot key
8. DDC/CI BR/CT adjustment
Response Time
1. Show on existing Response Time setting by
red color
2. Key button definition:
[1]: Back to previous OSD status
[2]: Change to the selected Response Time
setting.
[Up]: Scroll up the slider
(When push the button on the top position,
the slider shall go down to the bottom
item)
[Dn]: Scroll down the slider
(When push the button on the bottom
position, the slider shall go up to the top
item)
3. Default = Advanced
64
Standard
Over Drive = off
Advanced
Over Drive = Level 1
( best quality with over drive )
Ultra Fast
Over Drive = Level 2
( faster than level 1)
CONFIDENTIAL – DO NOT COPY
VX2433wm-1
VX2433wm-CN