No Read - Honeywell 1900GSR-2 User Manual

new symbols as long as the trigger is pulled. When this programming selection
is turned Off, the scanner will only read the symbol closest to the aiming beam.
Default = Off.
On
* Off

No Read

With No Read turned On, the scanner notifies you if a code cannot be read. If
using an EZConfig Tool Scan Data Window (see page 10-3), an "NR" appears
when a code cannot be read. If No Read is turned Off, the "NR" will not appear.
Default = Off.
On
* Off
If you want a different notation than "NR," for example, "Error," or "Bad Code,"
you can edit the output message (see Data Formatting beginning on page 6-1).
The hex code for the No Read symbol is 9C.
4 - 23