Gilbarco ® Terminal Default Settings; Honeywell Bioptic Aux Port Configuration; Datalogic™ Magellan © Bioptic; Aux Port Configuration - Honeywell 1900GSR-2 User Manual

®
Gilbarco Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Gil-
barco terminal. This bar code sets the baud rate to 2400 bps and the data
format to 7 data bits, even parity, 2 stop bits. It also also adds a carriage
return (CR) suffix and programs the following prefixes for each symbology:

Honeywell Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for a Honey-
well bioptic scanner auxiliary port configuration. This bar code sets the
baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop
bit.
Datalogic™ Magellan

Aux Port Configuration

Scan the following Plug and Play code to program the scanner for a Data-
logic Magellan bioptic scanner auxiliary port configuration. This bar code
sets the baud rate to 9600 bps and the data format to 8 data bits, no parity,
1 stop bit.
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Gilbarco Settings
Honeywell Bioptic Settings
©
Bioptic
Datalogic Magellan Bioptic Settings
Prefix
A
E0
FF
F
2 - 7