Upc-A - Honeywell 1900GSR-2 User Manual

Telepen Message Length
Scan the bar codes below to change the message length. Refer to
Message Length Description
mum and Maximum lengths = 1-60. Minimum Default = 1, Maximum
Default = 60.
Minimum Message Length

UPC-A

UPC-A On/Off
* On
UPC-A Check Digit
This selection allows you to specify whether the check digit should be
transmitted at the end of the scanned data or not. Default = On .
* On
(page 7-2) for additional information. Mini-
<Default All UPC-A Settings>
Maximum Message Length
Off
Off
7 - 23