Switch Deployment Status Errors - Dell Active Fabric Manager Deployment Manual

Switch Model Mismatch
System MAC Address
Mismatch

Switch Deployment Status Errors

Use the following table to troubleshoot switch deployment status errors.
Table 26. Switch Deployment Status Errors
Switch Deployment Status
NOT STARTED
94
2. If the pre-deployment configuration is updated, you might need to redeploy the
switch.
3. Validate the switch.
a. Navigate to the Network >
b. From the Deploy Fabric pull-down menu, select the Deploy and Validate
option.
c. Click the Validation tab and then select the switches to validate.
d. Click the Deploy Selected link.
1. Verify that the IP address to switch name mapping is correct in the pre-
deployment configuration.
2. If the pre-deployment configuration is updated, you might need to redeploy the
switch.
3. Validate the switch.
a. Navigate to the Network >
b. From the Deploy Fabric pull-down menu, select the Deploy and Validate
option.
c. Click the Validation tab and then select the switches to validate.
d. Click the Deploy Selected link.
1. Verify that the IP address to switch name mapping is correct in the pre-
deployment configuration.
2. If the pre-deployment configuration is updated, you might need to redeploy the
switch.
3. Validate the switch.
a. Navigate to the Network >
b. From the Deploy Fabric pull-down menu, select the Deploy and Validate
option.
c. Click the Validation tab and then select the switches to validate.
d. Click the Deploy Selected link.
Description
Not Started
Fabric Name > Configure and Deploy screen.
Fabric Name > Configure and Deploy.
Fabric Name > Configure and Deploy screen.
Requires Recommended Actions
Action
No Start the deployment of the switch
from the Network >
Configure and Deploy screen by
selecting the switch from the list and
then click on the Deploy Selected link.
NOTE: The switch is in BMP mode.
Fabric Name >