Pre-Deployment - Step 4: Assign Switch Identities - Dell Active Fabric Manager Deployment Manual

Table 15. Layer 2 Downlink Port Options
Option
Copy Switch VLAN Config
Copy Port VLAN Config
To configure downlink ports on the leaf switches:
1. Navigate to the Network >
2. From the Deploy Fabric pull-down menu, select the Pre-deployment Configuration option.
3. Navigate to the Downlink Port Configuration screen.
4. From the Switches pull-down menu, select a leaf switch.
5. In the Tagged VLANs, click on the icon next and enter one or more VLANs to be associated with the port.
6. When you are finished, click the Next button to go to the Pre-deployment: Step 4: — Assign Network Identities
screen.
Pre-deployment – Step 4: Assign Switch Identities
To assign the system MAC addresses to the switches in the fabric, use the Assign Switch Identities page. Entering the
serial numbers and service tags. Load the CSV file that contains the system MAC addresses, serial numbers, and service
tags for the switches in the fabric.
The following is a sample CVS file.
Table 16. Sample CVS Format
serial_number
00AS104600860
NOTE: Before you begin, obtain the CSV file that contains the system MAC addresses, service tag, and serials
numbers for each switch provided from Dell manufacturing or manually enter this information.
Figure 23. Assign Switch Identities
62
Description
Copies the VLAN association from the current switch to other switch(es) in the
fabric.
Copies the VLAN association from a selected port to other port(s) within a switch.
Fabric Name > Configure and Deploy screen.
purchase_order
163
mfg_part_number
S4810-01-GE-44T-AC-R
mac_address
00:01:E8:8B:15:86