Operations Allowed In Each Fabric State - Dell Active Fabric Manager Deployment Manual

Pre-deployment Required
Configuration
Error
Complete
Deployment Required
In-progress
Error
Complete
Validation Required
In-progress
Error
Complete

Operations Allowed in Each Fabric State

To determine which operations are allowed during the design, pre-deployment configuration, deployment, and validation
states, use the following table.
Table 12. Operations Allowed in Each Fabric State
Design Pre-Deploy
State Configuration
State
Incomplete Not Started
Complete Not Started
50
Indicates that not all required Pre-deployment Configuration information was
provided.
Indicates that an error occurred during file transfer (transfer of a minimum
configuration file) to the FTP/TFTP server or an error occurred during automatic
DHCP integration for the local DHCP server.
NOTE: In a case of remote the DHCP server, no errors are reported for the
DHCP integration step because it is not an automated step from the AFM;
you are responsible for manually integrating the DHCP configuration.
Indicates that Pre-deployment Configuration information is complete for the
switch.
Indicates that deployment was never initiated for the switch or the Deployment
state was reset due to a Design/Pre-deployment Configuration change.
NOTE: Deployment can be initiated/re-initiated only if Pre-deployment
Configuration is in a Complete state.
Indicates that deployment is in-progress and also provides the latest percentage
complete information.
Indicates that deployment error exists.
Indicates that deployment was successful for the switch.
Indicates that validation was never initiated for the switch or the Validation state
was reset due to a Design/Pre-deployment Configuration/Deployment change.
NOTE: Validation can be initiated only if deployment is in a Complete state.
Indicates that deployment is in-progress and provides the latest percentage
complete information.
Indicates that one or more validation errors exist.
Indicates that validation was successful for the switch.
Deployment State
Not Started
Not Started
Validation State Operation Allowed
Not Started
•
•
Not Started
•
•
•
•
Edit Fabric
Delete Fabric
View Wiring Plan
Edit Fabric (All
fabric attributes)
Pre-deployment
Configuration
Delete Fabric