Validation Errors - Dell Active Fabric Manager Deployment Manual

Device cleanup task failed
Complete configuration upload failed
Smart script transfer failed
Custom configuration upload failed
Backup config failed

Validation Errors

Use the following tables to troubleshoot the following validation errors when you deploy a fabric.
To view validation errors, navigate to the Network >
Errors link to view the following type of errors:
• Configuration
• Custom Configuration
• Custom Configuration Deployment
• Discovered Switch Errors
• Pre-deployment
• Undiscovered Switch Errors
• Wiring
2. Restart the deployment of the switch from the Network >
> Configure and Deploy by selecting the switch from the list and then
click on the Deploy Selected link.
1. Verify the Telnet or SSH connectivity from the AFM.
2. Restart the deployment of the switch from the Network >
> Configure and Deploy by selecting the switch from the list and then
click on the Deploy Selected link.
1. Verify TFTP/FTP or Telnet/SSH connectivity from the AFM.
2. Restart the deployment of the switch from the Network > Fabric Name
> Configure and Deploy by selecting the switch from the list and then
click on the Deploy Selected link
1. Verify connectivity to the switch from the AFM.
2. Restart the deployment of the switch from the Network >
> Configure and Deploy by selecting the switch from the list and then
click on the Deploy Selected link.
1. Verify the switch login credentials and commands.
2. Restart the deployment of the switch from the Network >
> Configure and Deploy by selecting the switch from the list and then
click on the Deploy Selected link.
1. Verify the Telnet SSH connectivity.
2. Restart the deployment of the switch from the Network >
> Configure and Deploy by selecting the switch from the list and then
click on the Deploy Selected link.
Fabric Name > Configure and Deploy screen and then click on the
Fabric Name
Fabric Name
Fabric Name
Fabric Name
Fabric Name
91