Dell Active Fabric Manager Deployment Manual page 96

MIN CONFIG UPLOAD
COMPLETED
INIT SOFT RELOAD
INIT SOFT RELOAD ERROR
PROTOCOL CONFIG UPLOAD
INPROGRESS
PROTOCOL CONFIG UPLOAD
ERROR
96
Minimum Configuration
Upload Successful
Initiated Soft Re-load on
Switch
Error During Soft Re-load on
Switch
Protocol Configuration
Upload In-Progress
Protocol Configuration
Upload Error
3. Verify that the system MAC
address in the dhcpd.conf file
matches the csv. file that
contains the MAC addresses of
the switches.
4. Verify that the min.cfg file is in
the correct directory on the
TFTP/FTP server.
5. Redeploy the switch from the
Network >
Configure and Deploy screen by
selecting the switch from the list
and then click on the Deploy
Selected link.
NOTE: The switch is in BMP
mode.
No Information only.
No Information only.
Yes
1. Check the switch syslogs for a
reload command failure.
2. Make any necessary fixes.
3. Restart the deployment of the
switch from the Network >
Name > Configure and Deploy
screen by selecting the switch
from the list and then click on the
Deploy Selected link.
NOTE: The switch is in BMP mode.
No Information only.
Yes
1. Verify the connectivity to the
TFTP server from switch.
2. Check the Validation Status
column for errors and fix them.
3. Verify that the DHCP server is
running.
4. Verify that the CFG file correctly
has been placed on the TFTP/FTP
server and that you can ping it
from the switch.
5. Redeploy the switch.
NOTE: The switch is not in
BMP mode.
Fabric Name >
Fabric