Basic Techniques
Customizing the Metronome
CLK5
Tuning Click-Set Sounds
On the CLK5 page, you can tune the sounds for each of the metronome subdivisions (i.e., "
¤
‹
ßß
"
", "
", "
", and "
1.
Hold down the [SHIFT] button and press the [
to access the Metronome area.
2.
Navigate to the CLK5 page using the [<]/[>] buttons.
3.
Move the cursor to the subdivision symbol to the right
of "Sound=" (i.e., "
and turn the Data Dial to select the one to set.
4.
Move the cursor to the number to the right of "Tune=",
and turn the Data Dial to change the tuning.
Metronome subdivision sounds can be tuned between -24.0 and +24.0 semitones.
CLK6
Tapping the Tempo on the Pads
On the CLK6 page, you can use the Tap Tempo function to set the tempo by striking pads.
1.
Hold down the [SHIFT] button and press the [
to access the Metronome area.
2.
Navigate to the CLK6 page using the [<]/[>] buttons.
3.
Strike a pad at least three times at the desired tempo.
The tapped tempo will be displayed on-screen.
36
DTX502 Owner's Manual
Œ
").
CLK5* Sound=A˘
"
tune=+ 0.0
A˘
¤
", "
", "
CLK6* tAP tEMPO
"
A˘
] button
‚
‹
ßß
Œ
", "
", or "
"),
] button
⁄=120
",