Yamaha DTX Drums DTX502 Owner's Manual page 30

Basic Techniques
Performing with a Song
5.
If necessary, move the cursor to the voice category
using the [<]/[>] buttons.
6.
Turn the Data Dial to select " e " (pad song) as the
voice category.
7.
Move the cursor to the song number using the [<]/
[>] buttons.
8.
Turn the Data Dial to choose a pad song.
See the Data List section (page 83) for details of the available pad songs.

Setting Repeat and Play modes
 Setting the pad song's Repeat mode
1.
Move the cursor to the Repeat mode symbol using
the [<]/[>] buttons.
2.
Turn the Data Dial to change the mode setting.
≥
μ
 Setting the pad song's Play mode
1.
Move the cursor to the Play mode symbol using
the [<]/[>] buttons.
2.
Turn the Data Dial to change the mode setting.
Â
Ê
Á
30
DTX502 Owner's Manual
KIt2
"S01:MapleCustm‚
KIt2* snareHd
"Ö01:Demo
KIt2*
"Ö01:Demo
KIt2* snareHd
"Ö39:Funk C
Repeat mode
: Normal play
: Repeat play—that is, the song starts again from the beginning after
playing to the end
: The pad song will start or stop accordingly whenever the pad is struck.
: The pad song will play one measure at a time whenever the pad is
struck.
: If any other pad song of the same type is already playing, it will be
stopped before playing the pad song selected here.
snareHd
≥‚
snareHd
≥‚
≥‚
Play mode
NOTE
• Pad songs are played back inde-
pendent of the main song selected
on the SONG1 page.
• Pad songs cannot be played when
recording a song or when practicing
in Training Mode.