Assigning Voices To Instruments - Yamaha DTX Drums DTX502 Owner's Manual

KIT2

Assigning Voices to Instruments

1.
Navigate to the KIT2 page using the [<]/[>] buttons.
2.
Strike the pad whose instrument voice you wish to
change.
3.
If necessary, move the cursor to the voice category
using the [<]/[>] buttons.
4.
If necessary, turn the Data Dial to select a different
voice category.
Voices are organized into the following categories on the DTX502.
K Kick
S Snare
T Tom
Cymbal
C
5.
Move the cursor to the voice number using the [<]/[>]
buttons.
6.
Turn the Data Dial to select a different voice.
KIt2 Snare
"S01:MapleCustm‚
KIt2 Snare
"S01:MapleCustm‚
H Hi-hat
P Percussion
E Effect
Wave Voice
W
KIt2* Snare
"S01:MapleCustm‚
Basic Techniques
Building Your Own Unique Kits
NOTE
As an alternative to selecting a pad by
striking it, you can change the current
selection by pressing the [<]/[>] but-
tons with the [SHIFT] button held
down.
NOTE
The term "Wave Voice" refers to an
audio file transferred from a computer
to your DTX502 via USB (page 79).
NOTE
• When voice number 0 ("No Assign")
is selected for an instrument, it will
not produce any sound when struck.
• To assign a voice to a specific zone,
strike the zone while holding down
the [SHIFT] button. For details, see
Tip: Input Sources on page 29.
• Two different voices can be simulta-
neously assigned to each pad or
zone. For details, see the descrip-
tion of the Layers page from Menu
Mode (page 57).
DTX502 Owner's Manual
21