Tempo Up/Down - Yamaha DTX Drums DTX502 Owner's Manual

Basic Techniques
Practicing in Training Mode
4.
Set the numbers of measures for which the metro-
nome is to be played and to be silenced.
• Using the [<]/[>] buttons, move the cursor to the parameter you wish to set.
• Turn the data dial to set the corresponding number of measures between 1 and 8.
5.
Press the [
6.
To end training, press the [
• Your score will be displayed on-screen. The highest possible score is 100 points.
• Press the [SAVE/ENTER] button to return to the training menu page (TRNG1).

4. Tempo Up/Down

Use Tempo Up/Down training to see how fast you can go and still maintain accurate timing. As
you play along with a metronome, the drum module will automatically increase the tempo if your
timing is good and decrease it if not. When you have finished training, your score will be dis-
played on-screen.

Training procedure
1.
Hold down the [SHIFT] button and press the [KIT]
button to access Training Mode.
2.
Turn the Data Dial to select "04:Tempo Up/Down" .
The [ ] button will start flashing, indicating that the drum module is on standby to
start training.
3.
Press the [
42
DTX502 Owner's Manual
tRNG2
" Meas=3 Brk=1
Measures for which the Measures for which the
metronome is played metronome is not played
] button when you are ready to go.
Measure:ƒ
LLLK
Measures for which the Measures for which the
metronome is played metronome is not played
] button once again.
tRNG1

04:tempo Up/Down

] button when you are ready to go.
NOTE
You can adjust the training tempo by
turning the Data Dial.
NOTE
If you wish to adjust the duration of
training, see the description of the
Timer page from Menu Mode (page
72).
NOTE
You can adjust the training tempo by
turning the Data Dial.