Basic Techniques
Performing with a Song
SONG2
Looping a Song
On the SONG2 page, you can set the current song to be played repeatedly in looped fashion.
1.
Press the [SONG] button.
2.
Navigate to the SONG2 page using the [<]/[>] buttons.
3.
Turn the Data Dial to change the loop setting.
• When Loop is set to "off", the song will stop automatically when it has played to the
end.
• When Loop is set to "on", the song will start again from the beginning when it has
played to the end.
SONG3
Playing with Count-In
On the SONG3 page, you can set whether or not you would like to be counted in before the song
starts.
1.
Press the [SONG] button.
2.
Navigate to the SONG3 page using the [<]/[>] buttons.
3.
Turn the Data Dial to change the count-in setting.
• When PlayCount is set to "off", you will not be counted in.
• When PlayCount is set to "on", you will be counted in over two measures.
28
DTX502 Owner's Manual
SONG2
"
Loop=off
SONG3
"PlayCount=off ‚
‚
NOTE
The loop setting for User songs is
retained even when the DTX502 is
turned off.
NOTE
The count-in setting applies to all
songs.