Kitj2 Clear User Kit; 05: Pad Area: Pad-Related Settings; Pad1 Hi-Hat Splash Sensitivity; Pad2 Foot Close Position - Yamaha DTX Drums DTX502 Owner's Manual

Clear User Kit
KitJ2
>KitJ2 Clear
"51:User Kit
On the Clear User Kit page, you can restore a User kit to its
default settings.
1.
Navigate to the Clear User Kit page and specify which of the
User kits (numbered 51 to 100) is to be cleared.
>KitJ2 Clear
"51:User Kit
User kit number
2.
Press the [SAVE/ENTER] button.
You will be asked to confirm that you wish to clear the User
kit.
>KitJ2 Clear
Are you sure?
CAUTION
When a User kit is cleared, all of its settings will be
returned to their default conditions. Before proceeding,
therefore, you should ensure that the User kit in ques-
tion contains no irreplaceable settings.
Press the [SAVE/ENTER] button once again to clear the
User kit. To cancel the process without clearing any settings,
press the [ ] button.
3.
When the User kit has been successfully cleared, the mes-
sage "Completed." will be displayed.
Setting Parameters using Menu Mode
05: Pad Area
Pad-related settings
Hi-hat Splash Sensitivity
Pad1
>Pad1
" Splash= 30
q Splash
Use this parameter to set the degree of sensitivity for detect-
ing hi-hat foot splashes. The higher the value, the easier it
will be to produce a foot-splash sound with the hi-hat control-
ler. High values may, however, result in splash sounds being
unintentionally produced when, for example, you operate the
hi-hat controller lightly as you keep time. It is a good idea to
set this parameter to "off" if you do not want to play foot
splashes.
Settings
off, 1 to 127
Foot Close Position
Pad2
>Pad2
" ClosePos=28
q ClosePos
Use this parameter to adjust the position at which the hi-hat
switches from open to closed when the hi-hat controller is
depressed. The lower the value, the smaller the virtual open-
ing between the top and bottom hi-hats.
Settings 0 to 32
Advanced Techniques
‚
q
‚
q
DTX502 Owner's Manual
65