Installing Integrated Lan Support (National Semiconductor); Installing Integrated Wireless Support - HP OmniBook xe4100 - Notebook PC Manual

Installing Windows 2000
Installing Retail Windows 2000 (Omnibook XE4500)

Installing integrated LAN support (National Semiconductor)

1. Go to Start, Settings, Control Panel. Double-click the System icon, select the
Hardware tab then click on the Device Manager button.
2. Double-click on the "Ethernet Controller" item under Other Devices.
3. Click on the "Reinstall Driver" button.
4. When the hardware wizard appears, click Next.
5. Select "Search for a suitable driver for my device" and click Next then Next again to
allow the search for the driver.
6. Click Next to install the driver found in the \hp\drivers\lan directory on the Recovery
CD.
7. Click Finish, then close the properties window.

Installing integrated wireless support

1. Go to Start, Settings, Control Panel. Double-click the System icon, select the
Hardware tab then click on the Device Manager button.
2. Double-click on the "Network Controller" item under Other Devices.
3. Click on the "Reinstall Driver" button.
4. When the hardware wizard appears, click Next.
5. Select "Search for a suitable driver for my device" and click Next then Next again to
allow the search for the driver.
6. Click Next to install the driver found in the \hp\drivers\wireless directory on the
Recovery CD.
7. Click Finish, then close the properties window.
8. Double-click \hp\drivers\wireless\setup.exe to install the wireless LAN management
and configuration utility.
9. Click Next in the "Welcome" window.
10. Click Yes to accept the license agreement.
11. Click Next to start installation, then Finish to finalize it.
12. Click Finish to reboot the notebook.
104 Corporate Evaluator's Guide