HP OmniBook xe4100 - Notebook PC Manual page 148

Troubleshooting and Maintenance
Configuring the Computer
Main Menu
Setting
BIOS Revision
System Time
System Date
Internal Hard Disk
Memory
CPU Serial Number
Serial Number
PC ID string
Service ID
UUID
MAC Address
System Devices Menu
Setting
Video Display Device
Television Type
External Pointing
Device
Legacy USB Support
148
Description
Shows the current BIOS version.
Sets the time using 24-hour format. Values set take effect
immediately.
Sets the date using dd/mm/yy format (except English, which
uses mm/dd/yy format).
Sets the hard disk drive type and various parameters.
Shows the extended memory size.
For a Pentium processor with a serial number, makes the
serial number available to software.
Displays the serial number as shown on the back of the unit.
Displays the PC ID String stored in the reserved part of RAM.
Displays an identifier used for repair service.
Displays the value of the 16-byte UUID (Universally Unique
ID) as 32 hex characters.
Displays the MAC network address of the internal (wired)
LAN, if present.
Description
Sets whether the built-in display automatically switches to an
external display, if one is detected.
Controls the signal format (NTSC or PAL) output by the
S-video port.
Disables the internal pointing devices when an external
pointing device is connected.
Enables BIOS support for USB mouse, keyboard, and floppy
disk drive during startup.
Corporate Evaluator's Guide
Default
Detected
automatically.
Detected
automatically.
Detected
automatically.
Disabled
Detected
automatically.
Detected
automatically.
Detected
automatically.
Detected
automatically.
Default
Auto
Depends on
region
Auto
Enabled