Cd-Rom And Dvd Problems - HP OmniBook xe4100 - Notebook PC Manual

If sound does not record
Try plugging in an external microphone. Your model may not have a built-in
microphone.
Check the software controls for recording sound: click Start, All Programs (or
Programs), Accessories, Multimedia (or Entertainment), Sound Recorder.
In Volume Control, click Options, Properties, and make sure the microphone is
enabled in the recording controls.
Test the audio with the e-Diagtools diagnostics. See "Testing the Hardware" on
page 145.
If you hear a loud high-pitched whine (feedback) from the speakers
In the Volume Control, try reducing the Master volume: double-click the speaker icon
in the taskbar.
In Volume Control, click Options, Properties, and select the microphone option for
the playback settings. Then in Volume Control, make sure the microphone is muted.
If your model has a built-in microphone, avoid using it and the built-in speakers at the
same time.

CD-ROM and DVD Problems

If you can't boot from a CD or DVD in the CD/DVD drive
Make sure the CD or DVD is bootable, such as the Recovery CD or DVD.
Make sure the CD-ROM/DVD drive is selected as the boot device—see "To change
the boot device" on page 30.
Restart the computer: click Start, Turn Off Computer (or Shut Down), Restart.
Test the DVD drive with the e-Diagtools diagnostics. See "Testing the Hardware" on
page 145.
If a DVD plays erratically
Dirt or smudges can cause a disc to skip. Clean the disc with a soft cloth. If the disc is
badly scratched, it will probably have to be replaced.
If you're playing the DVD on battery power, try changing the power scheme. See the
hint under "To play DVD movies" on page 39.
Troubleshooting and Maintenance
Troubleshooting Techniques
Corporate Evaluator's Guide 125