To Update The Bios - HP OmniBook xe4100 - Notebook PC Manual

CAUTION

To update the BIOS

Hewlett-Packard may provide updates to the computer BIOS to enhance the capabilities
of your system. You can use e-Diagtools for Windows to download and install BIOS
updates.
Because a BIOS update replaces the previous version, you must follow these
instructions exactly, or you risk damaging your computer. The BIOS update
process resets the configuration settings in the BIOS Setup utility, except for the
PC Identification and BIOS passwords.
1. In Windows, exit any programs that are running.
2. Remove any PC Cards.
3. If the computer is docked, undock it.
4. Connect the AC adapter.
5. Connect any cables or equipment needed to connect to the Internet.
6. Click Start, All Programs (or Programs), Hewlett-Packard, Notebook,
HP e-Diagtools, e-Diagtools for Windows.
7. Click Update, select Download Now and click OK. Follow the instructions that
appear. Once the update process begins, do not interrupt it.
The first time you make an Internet connection from this program, click Change
Settings in the Connect window to define your connection settings.
8. When the process is complete, reset the computer by inserting the tip of a ballpoint
pen into the reset button on the bottom of the computer.
BIOS updates are also available from the HP Business Support Web site
(www.hp.com/go/bizsupport).
Troubleshooting and Maintenance
Reinstalling and Updating Software
Corporate Evaluator's Guide 153