Macintosh Environment; Network Fax (N/W-Fax) Driver Problems; N/W-Fax Driver Installation Error Messages - Oki MC780fx User Manual

TROUBLESHOOTING FOR NETWORK CONNECTIONS

Macintosh environment

1
No. Check...
1 Are the IP address properties correctly set?
2 Can you access any other network device from the
Macintosh computer?
3 Can another Macintosh computer on the network print to
the equipment? If so, compare the settings to determine
which need to be changed to support print from this
2
machine.

Network Fax (N/W-Fax) Driver Problems

This section describes the troubleshooting for the Network Fax (N/W-Fax) driver.
3

N/W-Fax Driver Installation Error Messages

Note
Replace "Printer" with "N/W-Fax" as required in the troubleshooting description.
For information on the installation of the N/W-Fax driver, refer to the Basic Guide.
4
 Setup needs to copy Windows NT files
Problem description
The wrong port type was selected from the Printer Ports dialog.
Corrective action
1. Click Cancel until the Add Printer Wizard terminates.
5
2. Select [Add a printer] in the Devices and Printers folder to start the Add Printer Wizard, and then perform the installation again.
3. When the screen for selecting a port is displayed, select [Local port] to add a printer.
 Client software DVD now required
Problem description
When adding a new printer driver, the end user did not choose the Have Disk option; instead, the user selected the machine name
6
from the Add Printer list.
Corrective action
1. Cancel the Add Printer Wizard.
2. Select [Add a printer] in the Devices and Printers folder to start the Add Printer Wizard, and perform the installation again.
3. When the screen for selecting a printer is displayed, select [Have Disk].
4. Select [Use Existing Driver] to add another copy of an existing driver or browse to the subdirectory that contains the appropriate
*.inf file.
7
 File *.DRV on client DVD could not be found
Problem description
When adding a new printer driver, the user did not choose the Have Disk option but selected the machine name from the Add Printer
list.
Corrective action
1. Cancel the Add Printer Wizard.
2. Select [Add a printer] in the Devices and Printers folder to start the Add Printer Wizard, and perform the installation again.
Yes No Corrective Action
Next Step Set up the IP address correctly.


Refer to your Macintosh networking documentation or
Next Step


contact Macintosh technical support.
Refer to your Macintosh networking documentation or
contact Macintosh technical support.
End 
- 38 -