2. Select Allow from the Action drop-down list.
3. Select pop3 from the Service drop-down list.
4. Select to a particular server from the Destination drop-down list and enter appropriate IP address in the
IP text box.
5. Click OK.
5. Click Finish.
Figure 77
Deny FTP service except to a particular server
1. Click the New link in the Networks tab.
To define the access rule to an existing network, click the network. The edit link appears. Click the edit link
and navigate to the Access tab.
2. In the Basic Info tab, enter the appropriate information.
3. Click Next and set appropriate security levels using the slider button in the Security tab.
4. Click Next. The Access tab appears. The Allow any to all destinations access rule is enabled by default. This
rule allows traffic to all destinations. To define deny FTP service access rule except to a particular server,
perform the following steps:
1. Click the New button. The New Rule box appears.
2. Select Deny from the Action drop-down list.
3. Select ftp from the Service drop-down list.
4. Select except to a particular server from the Destination drop-down list and enter appropriate IP address
in the IP text box.
5. Click OK
5. Click Finish
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide
Defining Rule - Allow POP3 Service to a Particular Server
Instant Firewall | 95