Language; Airwave Setup; Pause/Resume; Views - Dell PowerConnect W-IAP175P User Manual

Language

The language links are provided in the login screen to allow users to select the preferred language before logging
in to the Instant UI. These links are located at the bottom left corner of the Instant UI. A default language is
selected based on the language preferences in the client desktop operating system or browser. If Dell Instant
cannot detect the language, then English (En) is used as the default language.

AirWave Setup

AirWave is a solution for managing rapidly changing wireless networks. When enabled, AirWave allows you to
manage the Instant network. For more information on AirWave, see
Management"
AirWave status is Not Set Up, click the Set Up Now link to set up the AirWave. The Settings box appears with
Admin tab selected. For information to configure AirWave, see
Figure 23

Pause/Resume

The Pause/Resume link is located at the bottom right corner of the Instant UI. The Instant UI is automatically
refreshed after every 15 seconds by default.
Click the Pause link to pause the automatic refreshing of the Instant UI. When the automatic Instant UI
refreshing is paused, the Pause link changes to Resume. Click the Resume link to resume automatic refreshing.
The Pause link is useful when you want to analyze or monitor the network or a network element and therefore do
not want the user interface to refresh. Automatic refreshing allows you to get the latest information about the
network and network elements.

Views

Depending on the link or tab that is clicked, the Instant UI displays information about the virtual controller, Wi-
Fi networks, IAPs, or the clients in the Info section. The views on the Instant UI are classified as follows:
Virtual Controller view - The Virtual Controller view is the default view. This view allows you to monitor the

Dell Instant network.
Network view - The Network view provides information that is necessary to monitor a selected wireless

network. All Wi-Fi networks in the Dell Instant network are listed in the Networks tab. Click the name of the
network that you want to monitor. Network view for the selected network appears.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide
. The AirWave status is displayed on the right side of the language links in the Instant UI. If the
AirWave Setup Link – AirWave Configuration
Chapter 18, "Airwave Integration and
"Configuring AirWave" on page 114.
Instant User Interface | 33