The Shared Key; Entering The Organization String And Amp Information Into The Iap; Airwave Discovery Through Dhcp Option; Figure 90 Configuring Airwave - Dell PowerConnect W-IAP175P User Manual

AMP User: "Org Admin" (assigned to the role "Org Admin")

Folder: "Org" (under the Top folder in AMP)

Configuration Group: "Org"

Additional strings in the Organization String are used to create a hierarchy of subfolders under the folder
named "Org":
subfolder1 would be a folder under the "Org" folder

subfolder2 would be a folder under subfolder1


The Shared Key

The Shared Secret key is used by the administrator to manually authorize the first Virtual Controller for an
organization. Any string is acceptable.

Entering the Organization String and AMP Information into the IAP

1. Click the AirWave Set Up Now link in the bottom-middle region of the Instant UI. The Settings box with the
AirWave tab selected appears.
Figure 90
2. Enter the name of your organization in the Organization name text box.
3. Enter the IP address of the AirWave server in the Airwave IP text box.
4. Enter the shared key in the Shared key text box and reconfirm. This shared key is used for configuring the first
AP in the Dell Instant network.
5. Click OK.

Airwave Discovery through DHCP Option

The AirWave configuration can also be performed on the DHCP option that is configured on the DHCP server.
You can configure this only if the Airwave is not configured earlier or have deleted the precedent configuration.
On the DHCP server, the format for option 60 is
ip,ams-key
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide
Configuring AirWave
.
, and the format for option 43 is
ArubaInstantAP
Airwave Integration and Management | 115
ams-