Editing A Network; Deleting A Network; Figure 33 Configuring A Splash Page - Encryption Settings - Dell PowerConnect W-IAP175P User Manual

Figure 33
6. Click Next. The Access tab appears. The Allow any to all destinations access rule is enabled by default. This
rule allows traffic to all destinations. Instant Firewall treats packets based on the first rule matched. For more
information, see
To edit the default rule, perform the following steps:
a. Select the rule and click the Edit button.
b. Select appropriate options in the Edit Rule box and click OK.
To define an access rule, perform the following steps:
a. Click the New button.
b. Select appropriate options in the New Rule box.
c. Click OK.
7. Click Finish.

Editing a Network

To edit a network, perform the following steps:
1. In the Networks tab, click the network of the network which you want to edit. The edit link appears.
2. Click the edit link. The Edit network box appears.
3. Make the required changes in any of the tabs. Click Next or the tab name to move to the next tab.
4. Click Finish.

Deleting a Network

To delete a network, perform the following steps:
1. In the Networks tab, click the network which you want to delete. An x appears against the network to be
deleted.
2. Click x. A delete confirmation box appears.
3. Click Delete Now.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide
Configuring a Splash Page - Encryption Settings
Chapter 12, "Instant Firewall" .
Wireless Network | 47