Configuring Adaptive Radio Management; Figure 47 Configuring W-Iap Connectivity Settings - Specifying Static Settings; Figure 48 Configuring W-Iap Radio Settings Mode - Access - Dell PowerConnect W-IAP175P User Manual

d. Enter the IP address of the DNS server in the DNS server text box.
e. Enter the domain name in the Domain name text box.
Figure 47
5. Click OK. and reboot the W-IAP.

Configuring Adaptive Radio Management

Adaptive Radio Management (ARM) is enabled in Dell Instant by default. However, if ARM is disabled, perform
the following steps to enable it. For more information about ARM, see
page 103.
1. In the Access Points tab, click the W-IAP for which you want to configure ARM. The edit link appears.
2. Click the edit link. An Edit AP box appears.
3. In the Edit AP box, click the Radio tab.
4. Select the Adaptive radio management assigned radio button.
Figure 48
58 | Managing IAPs
Configuring W-IAP Connectivity Settings - Specifying Static Settings
Configuring W-IAP Radio Settings Mode - Access
"Adaptive Radio Management" on
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide