Client Alerts Link; Ids Link; Figure 93 Throughput Graph; Table 13 Virtual Controller View - Graphs And Monitoring Procedures - Dell PowerConnect W-IAP175P User Manual

Figure 93
For more information about the graphs in the virtual controller view and for monitoring procedures, see
Table 13
Graph Name
Clients
Throughput

Client Alerts Link

For information about the Client Alerts link, see
and Management"

IDS Link

For information about the IDS link, see
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide
Throughput Graph
Virtual Controller View - Graphs and Monitoring Procedures
Description
The Clients graph shows the number of clients
associated with the virtual controller for the last
15 minutes.
To see an enlarged view, click the graph.
The enlarged view provides Last, Minimum,

Maximum, and Average statistics for the
number of clients associated with the Virtual
Controller for the last 15 minutes.
 To see the exact number of clients in the
Dell Instant network at a particular time,
hover the cursor over the graph line.
The Throughput graph shows the throughput of
all networks and IAPs associated with the
virtual controller for the last 15 minutes.
 Outgoing traffic - Throughput for outgoing
traffic is displayed in green. Outgoing traffic
is shown above the median line.
 Incoming traffic - Throughput for incoming
traffic is displayed in blue. Incoming traffic
is shown below the median line.
To see an enlarged view, click the graph.
 The enlarged view provides Last, Minimum,
Maximum, and Average statistics for the
incoming and outgoing traffic throughput of
the virtual controller for the last 15 minutes.
To see the exact throughput of the Dell Instant
network at a particular time, hover the cursor
over the graph line.
chapters.
Chapter 3, "Instant User Interface"
Chapter 3, "Instant User Interface"
Monitoring Procedure
To check the number of clients associated
with the virtual controller for the last 15
minutes,
1. Log in to the Instant UI. The Virtual
Controller view appears. This is the
default view.
2. Study the Clients graph in the Usage
Trends pane. For example, the graph on
the left shows that one client is
associated with the virtual controller at
11:43 hours.
To check the throughput of the networks
and IAPs associated with the virtual
controller for the last 15 minutes,
1. Log in to the Instant UI. The Virtual
Controller view appears. This is the
default view.
2. Study the Throughput graph in the
Usage Trends pane. For example, the
graph on the left shows 2.0 kbps
outgoing traffic throughput at 12:00
hours. It also shows some incoming
traffic throughput at the same time.
and
Chapter 20, "Alert Types
.
Monitoring | 119
Table 13.