Enabling Instant Radius; Radius Server Authentication With Vsa; Figure 60 Configuring External Radius Server; Figure 61 Enabling Instant Radius - Dell PowerConnect W-IAP175P User Manual

Figure 60
4. Click Next and click Finish.

Enabling Instant RADIUS

To enable Instant RADIUS, perform the following steps:
1. At the upper right corner of the Instant UI, click the Settings link.
2. In the Settings box, click the Advanced tab.
3. Select Enabled from the Dynamic RADIUS Proxy drop-down list.
Figure 61
4. Click OK.

RADIUS Server Authentication with VSA

An external RADIUS server authenticates network users and returns to the IAP the vendor-specific attribute
(VSA) that contains the name of the network role for the user. The authenticated user is placed into the
management role specified by the VSA.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide
Configuring External RADIUS Server
Enabling Instant RADIUS
Authentication | 71