Table of Contents
Advertisement
Scanning glass and rollers
Clean the scanning glass and rollers frequently to ensure the quality of transmit-
ted images and copies. Open the operation panel by pulling the front edge up
(grasp it at the PANEL RELEASE mark), and wipe the scanning glass, white
backplate, and rollers with a soft cloth.
Make sure that all dirt and stains (such as correcting fluid) are removed, as
dirt and stains will cause vertical lines on transmitted images and copies.
Adhesive cellophane tape is useful for removal of debris from the rollers.
Document
rollers
Note: The opening of the cover is shown exagerrated. The cover does not
open this wide.
The housing
Wipe the external parts and surface of the machine with a dry cloth.
Caution!
Do not use benzene or thinner. These solvents may damage or discolour the
machine.
Chapter 11 Maintenance
White
backplate
Scanning glass
85
Advertisement
Table of Contents
