Table of Contents
Advertisement
6
Windows 3.1 or higher users:
Select the Windows Program Manager.
Select the File drop-down menu and select the Run command. The command
screen will appear, displaying the command line. At the command line, type
the letter of your CD-ROM drive followed by Install.exe, and click OK.
Windows '95 users:
Select Start, and select Run. At the command line, type the letter of your
CD-ROM drive and then click OK. Double click on the Install.EX E icon in
the window that appears.
If you have previously installed the Sharp Multifunction software, an
opening screen will appear. Select the Install Sharp button.
7
From the Welcome screen, select Next to continue the installation process or
Cancel to stop installation. Enter the Registration and Fax Cover Page
information as requested, clicking Next until all information is complete.
8
The Choose Destination Location window will appear, displaying the
Destination Directory dialog box. The Destination Directory text box
contains the name of the system directory and the drive where program files
will be stored. The default and recommended) name for the directory is
given as Sharp. If Sharp is used as the directory name, no action is required.
The default drive is displayed as "C:\". However, you may select the Browse
button to choose any other drive.
9
Select the Next button to advance or select Back to return to the previous
screen. Selecting the Cancel button will stop the installation process.
A setup window will appear, and the name of the files being loaded and the
percentage of completion will be displayed.
If a prompt appears stating "Not Enough Disk Space A vailable", it will be
necessary to select another target drive, or make space on hard drive by re-
moving files so that the Multifunction Interface software can be properly in-
stalled.
10
A window will notify you that the A utoexec.bat and/or Config.sys and/or
A lacddm.ini, and/or W in.ini have been modified. Select the OK button in
each instance.
Note: The names given are the new names for the original system files (prior
to installation of Sharp Multifunction Software).
Chapter 1 Installation
11
Advertisement
Table of Contents
