Table of Contents
Advertisement
Comments:
Your fax is set for tone dialling. If you are on a pulse dial line, you must reset
the fax for pulse dialling. This is done by resetting Option Setting 8 as
described in Chapter 9, "Optional Settings".
If you are connecting the fax to a PBX, you may need to reset the fax to the
appropriate recall mode for the PBX. This is done by setting Option Setting
14 as described in Chapter 9
If you intend to use a computer fax modem on the same phone line, you must
reset Option Setting 15 to NO in order to prevent transmission and reception
errors. This procedure is described in Chapter 9, "Optional Settings".
Extension phones can be used to make and receive calls as normal with the
fax connected. For details on receiving faxes from an extension phone, see
Chapter 4, "Receiving Documents".
The facsimile machine will not ring in response to incoming calls and
cannot be used to make outgoing calls in the absence of mains power to
the machine. For this reason it is recommended that the fax is not left as
the only telephone instrument on line when in this state.
Your fax cannot be used on a key system without the necessary adaptation of
the system. Please consult the installers of the system if this is required.
Handset
Connect the handset lead to the handset and the fax as shown.
The ends of the handset lead are identical, so they will go into either
socket.
Place the handset on the handset rest.
Chapter 1 Installation
Use the handset to make ordinary
phone calls, or to transmit and
receive documents manually.
7
Advertisement
Table of Contents
