Connections - Sharp FO-1660M Operation Manual

Chapter 1 Installation
Connections
Power lead
Plug the power lead into a 230 V, earthed (3-prong) AC outlet.
The fax does not have a power on/off switch, so the power is turned on and
off by simply plugging or unplugging the power lead.
Important: Whenever you unplug the power lead, disconnect the fax ma-
chine from the telephone network first.
Caution: The mains outlet (socket-outlet) shall be installed near the equip-
ment and shall be easily accessible.
Telephone line cord
Plug one end of the telephone line into the socket on the fax marked "TEL.
LINE". Plug the other end into a new plan telephone wall socket.
If you do not have a new plan telephone socket, contact your local tele-
phone supplier. Connection to the telephone network must not be hard
wired.
Eire: Only the supplied cord should be used. If a longer cord is required,
please consult your supplier or servicing agent.
6