Sharp FO-1660M Operation Manual page 15

9
Close the print compartment cover, mak-
ing sure it clicks into place.
Caution! Close the cover slowly to
make sure it doesn't pinch your fingers.
10
If you replaced the film, initialize the
new film by pressing the FUNCTION
key, the "6" key, and the "#" key on the
operation panel. Make sure that INITIAL-
IZE FILM appears in the display, and
then press the START key. (Do not per-
form this step if you installed the initial
sample roll of film.)
When to replace the imaging film
The sample roll of imaging film provided with your fax is capable of printing ap-
proximately 60 pages of A4 size paper. When it is used up, FILM END will ap-
pear in the display. Replace it with the following imaging film which is
available at your dealer.
FO-15CR Imaging Film
One roll of FO-15CR imaging film is capable of printing approximately 470
pages of A4 size paper when printed continuously.
Caution!
The text of documents printed with the imaging film is visible on the
used film. If confidential information has been printed, dispose of the
film appropriately.
Chapter 1 Installation
FUNCTION
6
START
5