Optional Settings - Sharp FO-1660M Operation Manual

9
Optional
Settings
A variety of optional settings are available which you can use to fine-tune your
fax to better suit your needs. The settings are made by pressing the panel keys,
and each setting is described in the list below.
Accessing the settings
1
Press the keys shown at left. OPTION
SETTING will appear in the display.
2
Move through the list of settings by
pressing "#" to move forward, or "*" to
move backward. The settings will appear
in the order listed below.
3
When the desired setting appears in the
display, make a selection by pressing the
appropriate number key as described be-
low. Your selection will be automat-
ically stored.
4
Press the STOP key.
Settings
Setting 1: FINE RESOLUTION PRIORITY
This sets the default resolution (the resolution used if a setting is not made with
the RESOLUTION key) for transmitting documents. Press "1" (YES) to set it
to FINE, or "2" (NO) to set it to STANDARD.
Initial setting: "2"
Setting 2: NUMBER OF RINGS AUTO RECEPTION
This sets the number of rings your fax allows before answering an incoming
call in FAX and TEL/FAX reception mode. Enter any number from "1" to "5"
("1" to "3" in Eire).
Initial setting: "1"
FUNCTION
4
or
2
(Example)
STOP
73