Sharp FO-1660M Operation Manual page 18

Chapter 1 Installation
Connecting an answering machine
If desired, you can connect an answering machine to your fax. This will allow
you to receive both voice and fax messages on the same line while you are out.
For details on using this feature, see Chapter 7.
To connect an answering machine, remove the seal covering the socket marked
TEL. SET on the fax. Insert the modular plug of the socket adaptor into the
TEL. SET socket, and then insert the plug of the answering machine line into
the U.K. style socket of the adaptor.
Important: If the answering machine is not connected to the extension tele-
phone socket on the fax as shown, the set-up will not operate properly.
Eire: Remove the seal covering the socket marked TEL. SET on the fax.
Insert the plug of the answering machine line directly into the TEL.SET
socket.
Comments:
The safety status of this socket is TNV, and is provided for the connection of
approved telephone equipment only. To ensure continued safety compliance,
do not connect any other equipment to this socket.
More than one extension telephone may be connected to the same line as the
fax, provided that the total REN value does not exceed 4. This includes an
answering machine if connected as shown above.
8
When connecting an
Important:
answering machine, make sure the
line plug is inserted into the
answering machineís telephone
socket, not its telephone socket.
line