Loading The Imaging Film - Sharp FO-1660M Operation Manual

Chapter 1 Installation
Loading the Imaging Film
The printer unit in your fax creates printed text and images by applying heat to
the imaging film, which causes ink to be transferred from the film to the page.
Follow the steps below to install or replace the imaging film.
1
Press the release button marked OPEN
and open the print compartment cover.
Caution! The printing head (the strip
of metal on the underside of the cover)
applies heat to the imaging film. It
may be hot if a document has just been
printed.
2
If you are replacing the imaging film,
take the old film out of the printing com-
partment and remove the three (3) green
gears and the green flange from the ends
of the spools.
DO NOT DISCARD THE GREEN
GEARS AND THE GREEN
FLANGE!
2