Setting The Date And Time - Sharp FO-1660M Operation Manual

Setting the Date and Time
The date and time appear in the display and reports, and are printed at the top of
every page you transmit. Set the date and time by pressing the keys on the opera-
tion panel as shown below.
To correct a mistake, press the SPEED DIAL key to move the cursor back
to the mistake, and then enter the correct number.
1
Press the FUNCTION key and then the
"3" key. ENTRY MODE will appear in
the display.
2
Press the "*" key two times.
DATE & TIME SET will appear in the
display.
3
Press the START key.
4
Enter a two-digit number for the day
("01" to "31").
5
Enter a two-digit number for the month
("01" for January, "02" for February,
"12" for December, etc.).
6
Enter the last two digits of the year.
(Note: In the year 2000, "00" will appear
for the year.)
7
Enter a two-digit number for the hour
("00" to "23") and a two-digit number
for the minute ("00" to "59").
8
Press the START key and then the
STOP key.
Chapter 2 Initial Settings
FUNCTION
3
START
0 5
(Example: the 5th)
1
0
(Example: January)
8
9
(Example: 1998)
0
2
9
(Example: 9:25)
STOP
START
5
23