Table of Contents
Advertisement
To change the reduction/enlargement ratio option, keep pressing
3
the
(or
ratio to the desired setting (25% - 400%).
Press the "ENTER" button.
4
A checkmark (
selected value for one second, the display will return to the ready message.
After the number of copies entry, and selecting the colour mode
5
and copy quality settings, press the "START" button (
You get copies with the selected reduction/enlargement ratio preference.
To make quick zoom ratio adjustments
Press the "ZOOM" button, and then keep pressing the
1
"ARROW" buttons until the preset ratio which is near to the
desired value is displayed.
Keep pressing the
2
enlarge the zoom ratio to the desired value.
SETTING UP THE PREFERENCES FOR
COPIED IMAGES
Setting brightness
Follow the steps shown below to make the image lighter or darker.
Set the original on the original table and make sure that the desired
1
size of paper is set in any of the paper trays.
See page 33 to confirm the paper sizes in the unit.
Press the "BRIGHTNESS/INTENSITY" button and keep pressing
2
the
(or
the first line of the display panel.
REDUCING/ENLARGING THE IMAGE SIZE FOR COPYING
) "ARROW" button, and set the reduction/enlargement
5.Repeat Image
30%
-
) will appear, indicating the selected value. After displaying the
5.Repeat Image
30%
-
Ready to Copy
R 30%
A4
(or
) "ARROW" button until "Brightness" is shown on
1.Brightness
3.Normal
+
+
0
) "ARROW" buttons to reduce/
).
(or
)
37
Advertisement
Table of Contents
