Setting Up The Upper Paper Cassette; A Remove The Packing Screw Of The Cassette; B Removing The Cassette; C Change The Size Using The Side Plates F And R - Sharp SF-2025 Service Manual

5. Setting up the upper paper cassette

A. Remove the packing screw of the cassette.
Pull out the cassette drawer by lifting while pulling out drawer.
Remove the one packing screw that secures the paper tension plate
of the cassette.
In the case of the B5R cassette, it has been set at the factory.
B. Removing the cassette
Hold up the cassette grasping the both sides of the cassette and pull
it all the way out.
C. Change the size using the side plates F and R.
Remove two screws that hold the side plates F and R. Set the plates
into their position shown with notches, and secure with the two
screws.
Side plate R
Side plate F
Screws
D. Insert the rear plate
Remove the rear plate and set the plate into the position indicated for
the desired paper sixe.
Rear plate
Packing screw
Screws
5 – 5
E. Set the size detect spacer
Change the position of the size detect spacer. Move the spacer to the
appropriate positions.
Size detect spacer
Size detect spacer setting
A3
A4
A4R
B4
B5
B5R
F. Change the paper size indication plate
Remove the paper size indication plate. Install the plate so the size of
the paper can be seen from the window.
Paper sizes are printed on the front and the back of the paper size
indicator plate.
A4
(Front)
(Ex) A3 setting
Paper size indication plate
B5
(Back)