Table of Contents
Advertisement
SETTING UP THE PREFERENCES FOR COPIED IMAGES
Keep pressing the
3
setting value is displayed on the second line of the display panel.
Select the desired value from "1. Lightest", "2. Lighter", "3. Normal" (Default
setting), "4. Darker" and "5. Darkest" setting value.
Press the "ENTER" button.
4
A checkmark (
selected value for one second, the display will return to the ready message.
After the number of copies entry, and specifying the colour mode
5
and copy quality settings, press the "START" button (
You get copies with the specified brightness preference.
Setting intensity (Colour copy mode only)
Follow the steps shown below to adjust the intensity of the image.
Set the original on the original table and make sure that the desired
1
size of paper is set in any of the paper trays.
See page 33 to confirm the paper sizes in the unit.
Press the "BRIGHTNESS/INTENSITY" button, and keep pressing
2
the
first line of the display panel.
Keep pressing the
3
setting value is displayed on the second line of the display panel.
Select the desired value from "1. Least Colour", "2. Less Colour", "3. Normal"
(Default setting), "4. More Colour" and "5. Most Colour" setting values.
Press the "ENTER" button.
4
A checkmark (
selected value for one second, the display will return to the ready message.
After the number of copies entry, and specifying the copy quality
5
setting, press the "START" button (
You get copies with contrast preference.
38
(or
) will appear, indicating the selected values. After displaying the
(or
) "ARROW" button until "Intensity" is shown on the
2.Intensity
3.Normal
(or
) will appear, indicating the selected value. After displaying the
2.Intensity
4.More Colour
) "ARROW" button until the desired
) "ARROW" button until the desired
).
).
Advertisement
Table of Contents
