Cleaning And Storing The Unit - Sharp AJ-6000 Operation Manual

CLEANING AND STORING THE UNIT

Refer to the information below to clean the unit or store it for an extended period of time.
Before cleaning, be sure to turn off the power using the "POWER" button (
then unplug the power cord.
Cleaning the cabinet
If the cabinet becomes dirty, wipe it with a soft, clean and dry cloth without any waste
thread.
Cleaning the inside of the unit
If the smudge is sticky and hard to remove, wipe it with firmly squeezed wet cloth.
! When wiping inside the unit, be careful not to hurt yourself with projections inside it.
! Never wipe the portion around the print heads in the unit. Doing so will damage
the print heads.
Cleaning the original table and original cover
If the cabinet becomes dirty, wipe it with a soft, clean and dry cloth without any waste
thread.
58
Never wipe the portion
around the print heads.
) and