Table of Contents
Advertisement
After aligning the print heads, the message shown below (A
5
pattern) will appear in the display panel. Referring to the test chart
results, use the
value (select from -8 to +8) on the second line of the display panel.
Now press the "ENTER" button.
Look at the chart A on your test chart. Select the number under
the pattern sample, in which
of the two vertically parallel lines.
Example
-8
-7
-6
In the example shown above, "-8" shows the most appropriate
chart. Therefore, select "-8" to show on the display panel, and
then press the ENTER button.
Specify the best value for "B Pattern" setting in the same manner.
6
(select from -8 to +8)
Look at the chart B on your test chart. Select the number under
the pattern sample, in which
of the two horizontally parallel lines.
Example
-8
-7
-6
In the example shown above, "-6" shows the most appropriate
chart. Therefore, select "-6" to show on the display panel, and
then press the ENTER button.
(or
) "ARROW" button to display the best
Select A pattern
0
-
+
is located the closest to the centre
-8
-5
-4
-3
-2
-1
0
+1 +2 +3 +4 +5 +6 +7 +8
Select A pattern
-8
-
+
is located the closest to the centre
-6
-5
-4
-3
-2
-1
0
+1 +2 +3 +4 +5 +6 +7 +8
Select B pattern
-6
-
+
ALIGNING THE PRINT HEADS
+8
+8
17
Advertisement
Table of Contents
