Sharp AJ-6000 Operation Manual page 56

THE PRINT HEAD
Remove the new print head from its protective case.
6
Refer to "INSTALLING THE PRINT HEADS AND THE INK TANKS" for details.
(See page 13)
Insert the new print head.
7
Refer to "INSTALLING THE PRINT HEADS AND THE INK TANKS" for details on
how to insert the new print head. (See page 13)
Lower the print head latch.
8
Refer to "INSTALLING THE PRINT HEADS AND THE INK TANKS" for details.
(See page 14)
Remove the ink tanks from the old print head and insert them
9
into the newly inserted print head.
Refer to "Changing the ink tank" for detail on how to remove the ink tank from the
print head. (See page 50) And refer to "INSTALLING THE PRINT HEADS AND
THE INK TANKS" for details on how to insert ink tank into print head. (See page
12)
Close the maintenance cover.
10
Refer to "INSTALLING THE PRINT HEADS AND THE INK TANKS" for details on
how to close the maintenance cover. (See page 15)
Close the front cover.
11
Refer to "INSTALLING THE PRINT HEADS AND THE INK TANKS" for details on
how to close the front cover. (See page 15)
If a message appears warning you that any of the ink tanks are not attached
correctly, return to step 2 and follow the procedures once more.
Keep pressing
12
"2. No" on the second line of the display panel, and press the
"ENTER" button.
When all the print heads have been replaced...
New Black head?
1.Yes
Select "Yes".
New Colour head?
1.Yes
Select "Yes".
Cleaning the Print
Head...
After cleaning the all print heads, the unit will begin to print the alignment
patterns for print head alignment. Align the print heads after that.
Refer to "ALIGNING THE PRINT HEADS" for how to align the print heads. (See
page 16)
54
(or ) "ARROW" button to display "1. Yes" or
Printing...
Alignment Patterns