Ftlsnmp Prerequisites; Snmp Configuration File Updates - NEC Express5800/ftServer Administrator's Manual

Installing and Configuring ftlSNMP
Enter the following commands, and optionally, add them to the login user's profile (for
example /etc/.bash_profile).
# export MIBDIRS=/usr/share/snmp/mibs:/opt/ft/mibs
# export MIBS=ALL
This installs or upgrades the MIBs and subagents.

ftlSNMP Prerequisites

ftlSNMP requires Express Builder and the following Net-SNMP packages to be installed.
Note that n.n.n.n represents the current supported Net-SNMP release number.
net-snmp-libs-n.n.n.n
net-snmp-n.n.n.n
net-snmp-utils-n.n.n.n
net-snmp-perl-n.n.n.n

SNMP Configuration File Updates

To configure ftlSNMP, edit the following files:
/etc/opt/ft/snmp/snmpd.conf (see
and snmpd.conf(5))
N O T E
The Express Builder installation automatically creates snmpd.conf
in the /etc/opt/ft/snmp directory, while Net-SNMP
creates it in the /etc/snmp directory. You should use the
/etc/opt/ft/snmp version because it is the directory
that the ftlSNMP scripts reference.
/etc/opt/ft/snmp/ftlsubagent.conf (see
ftltrapsubagent.conf Files'' on page
/etc/opt/ft/snmp/ftltrapsubagent.conf (see
ftlsubagent.conf and ftltrapsubagent.conf Files'' on page
These files are created when you install or upgrade ftlSNMP, provided that they do not
already exist. If they already exist, installing or upgrading ftLSNMP does not overwrite
them. Use the information in the template files (for example,
/etc/opt/ft/snmp/snmpd.conf.template) as a guide when editing the files.
However, values of parameters to be set in these files are system-, network-, and
SNMP-manager specific.
8-4 Express5800/ftServer: System Administrator's Guide for the Linux Operating System
''The snmpd.conf File'' on page 8-133
''The ftlsubagent.conf and
8-133)
''The
8-133)