Table of Contents
Advertisement
Net-SNMP provides a functional network administration package for use on ftServer
systems to meet identified customer needs. ftlSNMP is a unique extension of
Net-SNMP that provides the SRA-ftLinux-MIB to define manageable systems and
components of ftServer Linux-based systems. ftServer subagents and MIB provide
SNMP support and services for fault-tolerant operations.
ftlSNMP Management Commands
The following commands are provided to start and stop the SNMP master agent
daemon and subagents on the ftServer host system:
start_snmp, stop_snmp, restart_snmp—These commands, start, stop,
and restart (stop, then restart) the two subagents, ftlsubagent and
ftltrapsubagent, and the master agent.
Use the preceding commands for most situations.
!
C A U T I O N
C A U T I O N
The following commands are also available to deal with
special situations. However, you should not normally use
them except under the guidance of the NEC Corporation
of America Customer Support Center or your authorized
NEC service representative, as starting and stopping
agents in untested order can have unforeseen
consequences.
start_all_subagents, stop_all_subagents,
restart_all_subagents—These commands start, stop, and restart only the
subagents.
start_ftlsubagent, stop_ftlsubagent, restart_ftlsubagent—These
commands start, stop, and restart only ftlsubagent.
start_ftltrapsubagent, stop_ftltrapsubagent,
restart_ftltrapsubagent—These commands start, stop, and restart only
ftltrapsubagent.
start_snmp_daemon, stop_snmp_daemon, restart_snmp_daemon—These
commands start, stop, and restart only snmp_daemon (the master agent).
Simple Network Management Using Net-SNMP and ftlSNMP
SNMP Foundations and Concepts
8-9
Advertisement
Table of Contents
Troubleshooting
