Managing Ftserver Hardware Components - NEC Express5800/ftServer Administrator's Manual

Managing SNMP
To use SNMPv3 with snmpwalk:
# snmpwalk -v 3 -l authNoPriv -u v3user -A new_passwd localhost
ucdavis
# snmpwalk -v 3 -l authNoPriv -u v3user -A new_passwd localhost
system
# snmpwalk -v 3 -l authNoPriv -u v3user -A new_passwd localhost
1.3.6.1.4.1.458
# snmpwalk -v 3 -t 40 -l authNoPriv -u v3user -A new_passwd
localhost
In these command examples, v3user and new_passwd are the user name and
password set up in

Managing ftServer Hardware Components

In the following command examples, v3user and new_passwd are the user name and
password set up in
To bring down a CPU element
Note that a final octet 1 identifies CPU element 0 and a final octet 2 identifies CPU
element 1.
# snmpset -v 3 -t 40 -l authNoPriv -u v3user -A new_passwd
localhost
To bring up a CPU element
# snmpset -v 3 -t 40 -l authNoPriv -u v3user -A new_passwd
localhost
To bring down an I/O element
Note that a final octet 1 identifies I/O element 10 and a final octet 2 identifies I/O
element 11.
# snmpset -v 3 -t 40 -l authNoPriv -u v3user -A new_passwd
localhost
To bring up an I/O element
# snmpset -v 3 -t 40 -l authNoPriv -u v3user -A new_passwd
localhost
8-20 Express5800/ftServer: System Administrator's Guide for the Linux Operating System
1.3.6.1.4.1.458
''Configuring SNMP for Service Management'' on page
''Configuring SNMP for Service Management'' on page
1.3.6.1.4.1.458.107.1.2.1.2.3.1.13.1 s test
1.3.6.1.4.1.458.107.1.2.1.2.3.1.11.1 s test
1.3.6.1.4.1.458.107.1.2.1.3.3.1.14.1 s test
1.3.6.1.4.1.458.107.1.2.1.3.3.1.12.1 s test
8-134.
8-134.